Kunkune

RP2040 Board Type-C 4MB/16MB Compatible for Raspberry Pi Pico Micropython

RP2040 Board Type-C 4MB Compatible with Raspberry Pi Pico Micropython

RP2040 Board Type-C 4MB Compatible with Raspberry Pi Pico Micropython

RP2040 Board, a product compatible with Raspberry Pi Pico Micropython.

RP2040 Board Key Features:

RP2040 Board Detailed Programming Options:

Firmware Update Steps for RP2040 Board:

  1. Connect the board to your computer using a Type-C USB cable.
  2. Press and hold the BOOT button on the device.
  3. While holding the BOOT button, press the RST button.
  4. Release the BOOT button after a second of pressing the RST button.
  5. Your device will now appear as a removable hard disk.
  6. Transfer the firmware update file to this disk.
  7. Post-transfer, the device auto-restarts, initiating the firmware update.

Important Note on Connectivity: Ensure you’re using the right cable. The commonly used USB A port to Type-C cable is designed for charging only. For data transfer between the YD-RP2040 and your host, a cable supporting data transfer is essential. Always check cable specifications to prevent connectivity issues.

Exit mobile version