YIHUA 982-V — Precision Soldering Station with C245 Cartridge Tips 60W | JBC-Compatible C245 Tips | 2-Second Heat-Up | Full-Colour LCD | Smart Sleep & Auto Shutdown
KEY FEATURES
- JBC-Compatible C245 Cartridge Tips: The 982-V uses cartridge-style C245 tips — the same technology found in JBC stations costing three to four times more. The heating element, temperature sensor, and tip are all integrated into one replaceable unit. Faster heat-up, instant thermal recovery, and tool-free tip changes — just pull and swap.
- 2-Second Heat-Up to Working Temperature: The station reaches 380°C in roughly 2–7 seconds, with solder melting within moments of powering on. Traditional soldering stations take 30–60 seconds to reach temperature. This is a different league entirely.
- Full-Colour LCD Display with Temperature Presets: Clear, readable colour display showing your set and actual temperature. Programmable preset channels let you store commonly used temperatures and switch between them instantly — no dialling in from scratch each time you change tasks.
- All-in-One Integrated Design: The station body integrates a metallic iron holder, brass wool tip cleaner, cleaning sponge with heat-resistant surround, tip-change storage groove, solder wire dispenser, handpiece cable guide, and calibration thermocouple slot. Everything you need is built into one compact unit.
- Smart Sleep & Auto Shutdown: Return the iron to its holder and the station drops to 200°C sleep mode. Leave it for 30 minutes and it shuts off completely. Pick it up and it reheats to your set temperature instantly. Saves energy, extends tip life, and eliminates the risk of leaving a hot iron unattended.
- 60W with PID Temperature Control: PID-regulated output across a 90–450°C range (194–842°F) with digital calibration. ESD-safe with tip-to-ground resistance under 2Ω. Universal voltage input (110–240V) works worldwide.
- Three C245 Tips Included: Ships with C245-I (fine conical), C245-K (blade/knife), and C245-SI (small chisel) — covering precision work, drag soldering, and general-purpose joints straight out of the box.
PRODUCT DESCRIPTION
Why Cartridge Tips Change Everything
If you’ve been soldering with a traditional station — where the heating element sits inside the handle and heats a separate removable tip — you’ve been working with a fundamental limitation. The sensor measuring temperature is centimetres away from the actual tip surface. The tip has to conduct heat along its length before it reaches your joint. When you touch a cold pad or a ground plane, the tip temperature drops and the station takes seconds to recover.
Cartridge tips solve this by putting the heater and sensor inside the tip itself, millimetres from the working surface. The result is near-instant heat-up, dramatically faster thermal recovery, and far more accurate temperature at the point where solder actually melts. It’s the same approach JBC uses in their professional stations — and it’s why technicians who switch to cartridge-style tips rarely go back.
The 982-V brings this technology to a price point that’s genuinely accessible.
What You’re Actually Getting
C245 Cartridge Compatibility. The C245 format is JBC’s general-purpose cartridge standard — a large ecosystem of tip shapes and sizes developed for professional soldering. The 982-V accepts C245 cartridges directly, giving you access to conical, chisel, blade, hoof, and specialty profiles. Three tips come in the box (fine conical, blade, and small chisel), covering the most common use cases. Additional C245 tips are widely available and significantly cheaper than genuine JBC cartridges.
Ultra-Fast Thermal Response. The integrated heater-sensor design means the station reaches 380°C in 2–7 seconds from cold. More importantly, when you touch a joint and the tip temperature dips, recovery is near-instant. For drag soldering TSSOP and QFP packages, this makes a noticeable difference — you can move along the pins at a steady pace without waiting for the iron to catch up.
All-in-One Station Design. Rather than cluttering your bench with separate tip holders, sponges, and brass wool, the 982-V integrates everything into the base unit. The metallic holder doubles as a sleep-mode trigger (a sensor detects when the iron is docked). The tip-change groove lets you swap cartridges safely without touching anything hot. The solder wire dispenser keeps your feed tidy. It’s a thoughtful layout that saves space and keeps your workflow clean.
Smart Power Management. The sleep and auto-shutdown system isn’t just a safety feature — it extends tip life significantly. Cartridge tips oxidise faster when held at high temperature, so automatically dropping to 200°C when the iron is in the holder means your tips last longer between replacements. The 30-minute auto-shutdown adds a second layer of protection for those moments you walk away and forget.
Temperature Presets. If you regularly switch between lead-free soldering (typically 350–380°C) and leaded work (300–320°C), or between fine-pitch SMD and heavier through-hole joints, the programmable presets save time. Dial in your preferred temperatures once, then switch between them with a button press.
Digital Calibration. Over time, or after swapping in a new cartridge, the displayed temperature can drift from actual tip temperature. The built-in calibration function lets you correct this against an external thermocouple — a feature that’s essential for consistent soldering quality and often missing from budget stations.
TECHNICAL SPECIFICATIONS
| YIHUA 982-V (C245) — Technical Specifications | |
|---|---|
| Model | YIHUA 982-V (C245 configuration) |
| Input Voltage | 110–240V AC, 50/60Hz (universal — UK plug included) |
| Power (C245) | 60W |
| Power (C210) | 40W (with optional C210 handle) |
| Power (C115) | 30W (with optional C115 handle) |
| Temperature Range | 90–450°C (194–842°F) |
| Heat-Up Time | ~2–7 seconds to 380°C |
| Temperature Control | PID with digital calibration |
| Display | Full-colour LCD |
| Temperature Presets | Programmable preset channels |
| °C/°F Switching | Yes |
| Sleep Mode | Auto — drops to 200°C when docked |
| Auto Shutdown | After ~30 minutes in sleep mode |
| ESD Protection | <2Ω tip-to-ground resistance |
| Tip Compatibility | C245 cartridge tips (also C210, C115 with respective handles) |
| Included Tips | C245-I (fine conical), C245-K (blade/knife), C245-SI (small chisel) |
| Integrated Features | Iron holder, brass wool cleaner, sponge, tip-change groove, solder dispenser, cable guide |
| Station Dimensions | ~160 × 79 × 80 mm (6.3 × 3.1 × 3.15 in) |
| Buzzer Feedback | Yes — adjustment and protection alerts |
| Operating Temp | 0–40°C |
WHAT’S IN THE BOX
✓ YIHUA 982-V soldering station with integrated holder and accessories
✓ C245 soldering handle
✓ C245-I tip (fine conical)
✓ C245-K tip (blade/knife)
✓ C245-SI tip (small chisel)
✓ Cleaning sponge with heat-resistant surround
✓ Brass wool tip cleaner (integrated)
✓ Calibration thermocouple slot
✓ UK power cord and instruction manual
Worth knowing: Additional C245-compatible cartridge tips are available from Kunkune and are a fraction of the cost of genuine JBC cartridges
HOW IT COMPARES
The 982-V sits in an interesting position: it’s a cartridge-tip station at a traditional-iron price.
A genuine JBC CD-2SHE with C245 capability costs £400+. The YIHUA 982-V delivers the same tip format, the same pull-and-swap convenience, and similar thermal response characteristics for roughly £40–50. The JBC wins on build quality, thermal recovery under sustained heavy loads, and the confidence that comes with professional-grade engineering — but for hobbyists and light-to-moderate repair work, the performance gap is narrower than the price gap suggests.
Within the YIHUA family, the 982-V’s main limitation is its 60W power output with C245 tips. The YIHUA 982-III pushes 120W — double the thermal capacity — which matters when you’re working on dense multilayer boards or large ground planes that soak up heat. If you regularly tackle boards where 60W feels like it’s struggling, the 982-III is the natural step up. For general SMD work, hobby soldering, and phone board repair, 60W with cartridge tips is more than adequate — the fast thermal recovery compensates for a lot.
Against other budget cartridge stations like the Aixun T3A (200W, ~£80–100), the 982-V trades raw power for a lower price and a more integrated design. The Aixun is the better choice if thermal power is your priority; the 982-V is the better choice if you want cartridge-tip convenience at the lowest possible entry price.
BEST USE CASES for YIHUA 982-V
General SMD soldering and rework — reflowing components, removing and replacing resistors, capacitors, and small ICs. The C245 cartridge tips excel here. Suitability: excellent.
Drag soldering TSSOP/QFP packages — the fast thermal recovery means you can move steadily along fine-pitch pins without cold joints. The blade tip (C245-K) is purpose-built for this. Suitability: excellent.
Hobby electronics and maker projects — Arduino, ESP32, through-hole kits, custom PCBs. The preset temperatures and quick heat-up make it a pleasure to use for project work. Suitability: excellent.
Mobile phone PCB repair (light to moderate) — connector replacements, small IC swaps, flex cable work. The precision of cartridge tips is a genuine advantage here. Suitability: very good.
Lead-free soldering — the higher temperatures required by lead-free solder are well within the 982-V’s 450°C ceiling, and the fast recovery handles the extra thermal demand of lead-free alloys. Suitability: very good.
Heavy-duty BGA rework on large ground planes — this is where the 60W limit shows. Dense multilayer boards and components with large thermal mass can overwhelm the station’s power budget. Consider the YIHUA 982-III (120W) or Aixun T3A (200W). Suitability: marginal.
High-volume production soldering — the 982-V is a compact hobby/light-repair station, not a production tool. For continuous professional use, invest in a JBC or Metcal system. Suitability: not recommended.
FREQUENTLY ASKED QUESTIONS
Are YIHUA 982-V tips compatible with JBC C245 tips?
Yes. The YIHUA 982-V accepts standard C245 cartridge tips, which are the same format used by JBC’s professional stations. You can use genuine JBC C245 cartridges, YIHUA’s own C245-compatible tips, or third-party C245 cartridges from various manufacturers. The tip ecosystem is large, with dozens of profiles available — conical, chisel, blade, hoof, knife, bevel, and specialty shapes.
How long does the YIHUA 982-V take to heat up?
The station reaches working temperature (around 380°C) in approximately 2–7 seconds from cold, depending on the tip size and target temperature. Solder typically melts within 2 seconds of powering on. When waking from sleep mode (where it holds at 200°C), it returns to your set temperature almost instantly.
Where can I buy the YIHUA 982-V in the UK?
YIHUA 982-V with 3x C245 tips is available from Kunkune — a UK-based retailer stocking YIHUA soldering equipment with fast domestic shipping via Royal Mail. Shipped from Oxfordshire, delivered in 1–2 days. No customs charges.
THE BOTTOM LINE
The YIHUA 982-V is cartridge-tip soldering at a price that used to buy a basic temperature-controlled iron. The C245 compatibility opens up a professional tip ecosystem, the 2-second heat-up transforms your workflow, and the integrated all-in-one design keeps your bench tidy. At 60W it’s not going to out-muscle a 120W station on dense boards, but for the vast majority of hobbyist, student, and light repair work, it’s more than enough — and the quality of the soldering experience is a genuine step up from anything in this price range with traditional tips.
One station. Cartridge tips. Professional-grade precision without the professional-grade price tag.
Reviews
There are no reviews yet.