RP2040 Dual Core Raspberry Pi Compatible Pico Board

Sale! -19%


Quantity Discount Discounted Price
5 - 9 5% £4.51
10 + 10% £4.28

RP2040 Dual Core Raspberry Pi Compatible Pico Board £5.90 £4.75
royal mail.jpg

FREE Shipping with Royal Mail for orders over £25


If ordered before 3 p.m.



RP2040 Dual Core Raspberry Pi Compatible Low-Power High-Performance Cortex-M0+ Processor


• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support


The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces.
The Raspberry Pi Pico features two ARM Cortex-M0+ cores run up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing options. This is paired with 2MB of onboard QSPI Flash memory for code and data storage.

In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK.

Pico has been designed to use either soldered 0.1″ pin-headers (it is one 0.1″ pitch wider than a standard 40-pin DIP package) or can be used as a surface-mountable ‘module’, as the user IO pins are also castellated.
There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow soldered SMT module.

The estimated delivery time:

  • Standard (Free for orders over 25£ or 1.90£ Service) – Estimated 1-2 working days
  • Tracked 24H – Estimated 1-2 working days with tracking
  • Next Day Special Guarantee- Next Working Day before 1 p.m. (if ordered before 3 p.m.)

Items are normally dispatched within 24 hours (the same day if ordered before 3 p.m., excluding weekends) in 99.9% of cases.

When you place an order, and it is successful, you will receive an email confirmation for the received order. When the order is dispatched, you will receive an email confirming that your order is complete. Please note that if the order is placed with the standard service, tracking will only show when a delivery attempt is made or when the order is delivered.