2-in-1 and 3-in-1 Soldering Stations
A 2-in-1 or 3-in-1 station puts more than one repair tool on the same bench, most often a soldering iron alongside hot air, and sometimes a bench power supply too, so you are not swapping units mid-job. Everything here is genuine YIHUA, UK stock, with a 12-month guaranteeand 60-day returns.
Showing all 7 resultsSorted by price: high to low
Showing all 7 resultsSorted by price: high to low
What “2-in-1” and “3-in-1” actually mean
A 2-in-1 combines a soldering iron with a hot air gun on one control unit, useful the moment a job needs both through-hole work and reflow or desoldering on the same board. A 3-in-1 adds a third function, usually a variable DC bench power supply for powering up a board mid-repair, or in some models a built-in vacuum desoldering pump. You are paying for one shared display, one footprint, and independent temperature control per tool rather than three separate boxes.
Which combo suits the job?
For general bench work where hot air is an occasional need, the YIHUA 8786D pairs a PID-controlled iron with hot air at a lower entry price, a sensible first 2-in-1.
If you regularly power up boards to test a repair, the YIHUA 853D adds a DC bench power supply to iron and hot air, so you can solder, rework and power-test without reaching for a separate unit.
For desoldering-heavy repair work, the YIHUA 948D-III pairs an iron with a genuine vacuum desoldering pump rather than hot air, built for pulling through-hole components cleanly on ESD-safe PCB and phone-repair jobs.
Hot air basics if you are new to it
Hot air reflows solder paste and lifts SMD components without direct contact, so it is the difference-maker for surface-mount rework that a bare iron cannot do cleanly. Airflow and nozzle size matter as much as temperature, too much heat too close will lift pads. If hot air is your main reason for buying, our best hot air rework station guide covers picks and settings in more depth, and the dedicated hot air rework stations range is worth a look if you do not need the iron built in.
Combo vs separate units
A combo saves bench space and cost versus buying an iron and a hot air station separately, and one supplier means one warranty. The trade-off is that if one function needs repair, you are without both. If you already own a good iron and only need to add hot air, or vice versa, it can work out cheaper to add a single-function unit instead, browse our full soldering stations range to compare.
2-in-1 and 3-in-1 soldering stations FAQ
Do I need a 2-in-1 or would a separate iron and hot air gun be better?
A 2-in-1 is the better choice if you are short on bench space or buying your first set of both tools together. If you already own a good iron and just want to add hot air occasionally, a separate hot air station can be the cheaper add-on.
What is the difference between the 8786D and the 853D?
The 8786D is a straightforward iron plus hot air 2-in-1 at a lower price. The 853D adds a variable DC bench power supply as a third function, useful if you regularly need to power a board while repairing it.
Can I use the hot air side for SMD rework?
Yes, that is its main job: reflowing solder paste and removing surface-mount components without direct iron contact. For heavier SMD/BGA work specifically, see our SMD rework range.
Is the 948D-III a soldering station or a desoldering station?
Both: it combines a soldering iron with a genuine vacuum desoldering pump rather than hot air, so it suits through-hole component removal and PCB repair work more than surface-mount rework.
Related
Soldering Stations · Hot Air Rework Stations · Desoldering Stations · Best Hot Air Rework Station UK · Best Soldering Stations UK 2026