12V Temperature Controller Digital Thermostat with Heating/Cooling Control
Designed to offer precision and reliability. Whether you’re managing domestic appliances or industrial equipment, this device ensures optimal temperature regulation.
Power Supply: 12V
Temperature Controller Key Features:
- Power Supply: 12V, ensuring consistent performance.
- Temperature Control Range: A wide range from -55°C to 120°C.
- Dual Colour Display: Choose between a vibrant red or cool blue LED display.
- Precision is Key: Measurement accuracy of ±0.1°C and control accuracy of 0.1°C.
- Environmental Adaptability: Operates efficiently in conditions ranging from -10°C to 60°C and humidity levels of 20%-85%RH.
- Extended Sensor Wire: Comes with a 1-meter sensor wire for flexible placement.
- Compact Design: With dimensions of 79mm x 43mm x 26mm, it’s sleek and fits seamlessly in any setup.
Versatile Applications:
- Domestic appliances such as freezers, water tanks, and refrigerators.
- Industrial equipment including chillers, steamers, and other temperature-controlled systems.
Package includes:
1 x Temperature Controller
1 x 1m Probe Cable
Easy Guide
Setting Up:
- Plug in the controller to give it power.
- When you first turn it on, it will show the room’s temperature.
- Press the “SET” button once, and the number will blink. This is where you set the temperature you want.
- Use the “+” or “-” buttons to pick your temperature. If you press and hold them, the number will change faster!
- Press “SET” again to save your choice.
Lights and Display:
- If the light blinks, it means the controller is getting ready to cool or heat.
- If the light stays on, it means it’s working to reach the temperature you set.
- If the display shows “LL”, check the sensor connection.
- If it shows “HH”, it means the temperature is too high.
- If it shows “—“, it’s a high temperature warning.
Cool Settings:
- Hold “SET” for 5 seconds until you see “P0”.
- Press “SET” once to pick between heating (H) or cooling (C).
- In cooling mode, if the room is hotter than your set temperature, it will start cooling. Once it’s cool enough, it will stop.
Heat Settings:
- In heating mode, if the room is colder than your set temperature, it will start heating. Once it’s warm enough, it will stop.
Other Settings:
- You can set a maximum and minimum temperature.
- If the displayed temperature seems wrong, you can adjust it a little.
- You can set a delay time, so it waits a bit before starting to cool or heat.
- If you want to keep your settings even if you turn it off, make sure “P7” is set to “ON”.
- If things get mixed up, you can reset everything to how it was when you first got it. Just hold the “+” and “-” buttons at the same time when it’s off, then turn it on.
And that’s it! Your temperature controller is all set up!
How To Use The Controller:
We also offer a range of digital multimeters for accurate electrical readings and oscilloscopes for in-depth signal analysis — perfect for any electronics workshop.
